Setting up the Terrain Editor
	Terrain Editor Setup

1. With "Elevation" selected and highlighted, click the New button .

2. Click the Grid button and in the drop down menu select "512 - ultra fine.

3. Click the Down Arrow button just under the Grid button and in the drop down menu select "Solid", "Smooth" and "Keep Gradient"

	Import Leg Alfa image and set depth
	Importing Leg Alpha Image

1. Select "Pictures" Above the first pictures window select "Load" then in the lower left corner select 'Copy"

2. In the second pictures window select "Paste"

3. Click and hold the bottom of the "Elevation Slider Bar" and drag it upwards to the middle of the scale and click the "Check Mark" .

4. Click the "View" arrow and select Camera View.

	Positioning the Leg

1. Place cursor/pointer over the right "X" axis, press and hold Ctrl., the "Rotate" icon will appear now, still holding down Ctrl, drag to to the right to rotate it -79° so that it is facing the camera. Or, Click the "A" and in the "Object Attributes" pop up menu type -79 degrees in the Rotate X axis box (under the General tab). Click the Check Mark or press Enter.

2. Place cursor/pointer over the top "Y" axis, press and hold Ctrl, the "Rotate" icon will appear now, still holding down Ctrl, drag to to the right to rotate it 0° so that it is facing the camera. Or, Click the "A" and in the "Object Attributes" pop up menu type 0 degrees in the Rotate X axis box (under the General tab). Click the Check Mark or press Enter.

3. Click the "A" and in the "Object Attributes" pop up menu in the Object Name box type "Left Leg" and set the Size X: 5.76, Y: 0.38 and Z: 5.76. Click the Check Mark or press Enter.

4. Click the "Edit Family" button directly underneath the "Objects Attributes" button and select a color for the Object and type in "Left Leg" to name the family color.

	Lower Left Leg Object Attributes
	Lower Left Leg Attributes... Origin X: -20.41, Y: 28.44 and Z: 21.51 Rotate X: -79, Y: 0 and Z: -31.50 Size X: 5.75, Y: 0.38 and Z: 5.76 Apply Above Attributes to the Leg Object

	Duplicating and positioning Legs

1. With the left leg selected, press Ctrl+D to duplicate it.

2. Hold down the Alt key, click and drag to the right to move the new leg up a little.

3. Click the "A" and in the "Object Attributes" pop up menu in the Object Name box type "Upper Left Leg" and set the Size X: 2.88, Y: 0.19 and Z: 2.88. Click the Check Mark or press Enter.

4. Click the "Edit Family" button directly underneath the "Objects Attributes" button and select a color for the Object and type in "Upper Left Leg" to name the family color.

	Upper Left Leg Object Attributes
	Upper Left Leg Object Attributes... Origin X: 19.66, Y: 32.89 and Z: 21.59 Rotate X: -79, Y: 0 and Z: -31.50 Size X: 2.88, Y: 0.19 and Z: 2.88 Apply the Above Attributes to the Upper Left Leg

5. With the Upper Leg still selected, hold down Ctrl and click the lower Left Leg. In the pop up window list, hold cursor over the the Left Leg and while holding down Ctrl+Shift and click to select both legs together.

6. Once both legs are selected, hit the Group button ,

7. Click the "A" and in the "Object Attributes" pop up menu in the Object Name box type "Left Legs"